ASO® application instructions

This ASO® Ankle Stabilizer is designed to be worn over an athletic sock. Position the heel of your foot in the heel locking area of the stabilizer. Lace the ASO® Ankle Stabilizer, being certain that there is no greater than two (2) inches of separation between the middle of the lacing eyelets (If the separation is greater than two inches, move to the next larger size.)

Bring the inside (medial) stabilizing strap forward across the top of the foot.

Wrap stabilizing strap under the heel and attach the Velcro® end of the strap to the side of boot. Repeat steps 2 and 3 for the outside (lateral) stabilizing strap.

To ensure optimum performance and support, tighten the stabilizing straps from a seated position with the foot flat on the floor. Use the finger loops at the strap ends to free the strap from the Velcro® on the side of the boot. Pull up firmly on both straps, then press straps against boot to secure.

Sizing…

Measure circumference from the base of the heel around the melleoli.

-------------------------------------------------------------------------------------------------

Size Circumference

x-small 10”-11”

small 11”-12”

medium 12”-13”

large 13”-14”

x-large 14”-15”

xx-large 15”-16”

Wrap elastic cuff closure over the tied laces and secured straps. To ensure optimum performance and support, the elastic cuff should be stretched to where the ASO® logo is facing forward.

ASO® is a registered trademark of Medical Specialties, Inc.

U.S. Patent # 5,067,486

© 2003, Medical Specialties, Inc.

Medical Specialties Inc.

4600-K Lebanon Rd. Charlotte, NC 28227

p:800-334-4143 f:800-694-9060 p:704-694-2434 f:704-694-9060